缬草根化学成分的研究

本文报道了湖南花坦县产的缬草根的化学成分，用气相色谱－色谱－计算机联用和波谱技术鉴定了缬草根中的４４个组分，其中乙酸里哪醇酯，２－蒈烯，马拶铃烯，瓦伦烯，香橙烯，愈创木烯，异尼醇，乙酸金合欢酯，邻苯二甲酸二异辛酯，６，１３－二甲基－十四烷酸和２－甲基十六烷酸甲酯等化合物是在缬草根中首次发现的，对缬草根中的氨基酸和微量元素也进行了测定。     

华中五味子挥发性成份的研究

华中五味子有收敛、止咳、止汗、止泻、活血和健胃等作用。近年来已分离到约15种非挥发性成份,但关于它的挥发性成份迄今未见报道。我们用毛细管气相色谱法分离出     

毛蕊杜鹃挥发油化学成分研究

毛蕊杜鹃(Rhododendron tubulosum Ching ex wang wei-yei)系杜鹃花科杜鹃花属植物,分布于四川、西藏、甘肃和青海,其中青海分布最广,藏民常作为单方草药用于治疗肺炎和老年慢性气管炎,具有镇咳、祛痰作用,本文用自制的同时水汽蒸馏-溶剂萃取装置,从采自青海玉树州的毛蕊杜鹃鲜叶和嫩枝提取挥发油,用毛细管气相色谱-质谱和Kovats指数双重定性法对     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

自动回流萃取-MPT全谱仪测定航空润滑油中磨损金属的含量

将萃取与回流相结合, 建立了一种处理航空润滑油中磨损金属的新方法, 并用MPT全谱仪对磨损金属含量进行了同时检测. 该方法基本上实现了样品处理的全自动化,克服了常用方法的部分缺点, 对Zn, Cd, Cu, Fe和Pb的检出限(3σ)分别为0.084, 0.043, 0.022, 0.052和0.064 μg/g; 相对标准偏差均小于5%(n=5); 回收率为94.5%~107.4%. 对3个润滑油样品的检测结果令人满意.     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

固体超强碱氧化钙催化制备生物柴油及其精制工艺

 以麻风果油为原料,研究了固体超强碱氧化钙在生物柴油制备工艺中的催化性能,考察了催化剂的焙烧温度、反应温度、反应时间、催化剂用量及醇油比对转化率的影响,确定了最优化的反应条件. 对产品脱钙精制工艺进行了研究, 考察了三种络合剂的脱钙性能. 结果表明,柠檬酸是一种很好的可用于生物柴油的脱钙剂,精制后生物柴油的主要指标符合国内外同类产品的标准.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

假蒟挥发油化学成分气质联用分析研究

采用常规水蒸气蒸馏法提取出假岛精油，经气相色谱-质谱联机分析，分出60多个峰，鉴定出67种化合物，它们主要是2，4，5-三甲氧基-1-丙烯基苯3．20％），顺-石竹烯（13．33％），1，2-二甲氧基-4-（1-丙烯基）苯（12．63％），细辛（9．94％），4-甲氧基-6-（2-丙烯基）-1，3-苯并二恶茂（5．71％），δ-杜松烯（3．03％）etc，占总峰面积的67．84％。     

栀子油脂中脂肪酸的GC/MS分析

本文介绍了栀子油脂中脂肪酸的气相色谱-质谱-计算机联用分析方法。栀子油脂中脂肪酸组成较为简单,主要以软脂酸(38.0%)和亚油酸(53.4%)为主,营养价值高,具有开发利用的价值。